Brick M100 Lviv
One of the most common and popular building materials in Lviv and Lviv region is deservedly considered to be brick M100, due to its availability and optimal characteristics. In particular, on the page of our website you will find information about ceramic ordinary hollow brick brand M100 with a coefficient of 1.35 NF, distinguished by non-standard dimensions of 250x120x88 mm - this is already a thickened brick, which has a larger volume compared to the standard due to the increased height, which allows you to speed up the masonry process and reduce mortar consumption. The use of thickened brick M100 helps save time and money during construction, which is what customers of the brick factory "Solonsko" use in the construction of almost any complexity. This thickened brick M100 is widely used not only in Lviv and Lviv region, but also in other cities of Ukraine, due to the optimal combination of strength, lightness, thermal insulation properties and affordable price. It is actively used in the construction of various objects, from low-rise residential buildings and cottages to outbuildings, garages and even some industrial buildings with low loads. Due to its versatility and ability to create a comfortable indoor climate, the M100 brick from the Solonsko plant has won the trust of builders and has become a reliable partner in the implementation of a variety of projects.
The hollow M100 brick presented on this page has a number of characteristics that make it an attractive choice for construction. Firstly, it is 25% emptiness - the presence of voids reduces the weight of the brick, reduces the load on the foundation and simplifies the masonry process, and it also creates air chambers that improve the thermal insulation properties of the wall. Secondly, it is frost resistance F25 - the brick is able to withstand up to 25 freeze-thaw cycles without losing strength, which allows it to be used in our climatic conditions, and if necessary for construction, it can be combined with facing bricks with increased frost resistance for external finishing of the facade. Thirdly, it is water absorption of 10% - the optimal level of water absorption provides good frost resistance and sufficient strength of the brick, and also contributes to its good adhesion to the mortar. The combination of these characteristics makes hollow brick M100 an ideal material for construction, providing reliability, durability, energy efficiency and a comfortable microclimate in the premises, and the high thermal insulation properties of the brick allow to reduce the costs of heating and air conditioning. The ideal balance of characteristics is carefully verified and time-tested, which is confirmed by numerous successful projects implemented using our bricks since 2011. Brick M100 from the plant "Solonsko" is not just a building material, it is an investment in comfort, energy efficiency and durability of your future home or building.
|
Brick M100 price
Brick with the M100 or M-100 brand means that according to the key strength indicator it is capable of withstanding average compressive loads, in our case it is up to 100 kg per square centimeter. This parameter is determined in laboratory conditions by testing on a special press, where the brick is subjected to a gradually increasing load until destruction - by the way, the test procedure and requirements for the strength of the brick are regulated by the state standard DSTU B V.2.7-61:2008, which also describes other requirements and test methods for obtaining certain characteristics of these building materials. The price of the brick primarily depends on strength, but other characteristics are also important, as well as their relevance.
Strength tests, as well as frost resistance and water absorption, are carried out in accredited laboratories using special equipment and methods. Brick samples are taken from a batch of products and subjected to loads, freeze-thaw cycles and immersion in water to determine the relevant characteristics. The frequency of testing depends on the type of brick, its purpose and customer requirements, but we usually conduct control tests of each batch of products to ensure that it meets the declared characteristics. In addition, tests can be carried out when putting the facility into operation, as well as during the operation of the building to control the quality and durability of the brickwork. Also, the customer or construction organization can additionally contact an accredited laboratory for additional testing, for example, in case of doubts about the quality of the brick or if it is necessary to confirm its characteristics. By the way, a low price for M100 bricks can sometimes indicate that this is a defective batch and there can be no talk of any compliance with standards.
Testing bricks is an important stage of product quality control and a guarantee of its compliance with regulatory requirements, which ensures the reliability, durability and safety of building structures, as well as choosing the optimal type of brick for a specific project. In our case, the thickened M100 brick also passes all the necessary tests in accordance with DSTU, which confirms its high performance characteristics and compliance with the declared grade of strength, frost resistance and water absorption. You can be sure of the quality and reliability of our brick, we provide all the necessary certificates and test reports confirming the compliance of our products with strict quality standards, and if this is not enough, you can conduct additional tests or personally check the quality of the brick when visiting our plant. Of course, it is possible to find M100 brick in Lviv at a lower price, but such a brick may not meet the declared characteristics and have hidden defects that will appear during operation and lead to a decrease in the strength and durability of the entire structure.
|
